(1) Main chain and side groups (2) End group 2.Semi-inorganic polymer composite materials 3. Environmental factors IOTA 9150IOTA 9150AHigh termperature curing polysilazane, pls check , .......
2024-10-17Heat-resistant silicone anti-corrosion coatings are usually divided into two categories: 260 ℃ used below and 260 ~ 650 ℃ range of coatings used. The former is usually modified silicone resin (silicon......
2024-10-17The corrosion test conditions need to be formulated based on the technical standards of the test coating materials or the usage conditions of the coating materials. The pH value of the solution, the a......
2024-10-16As the value of R/Si in glass resin is small (equal to or slightly greater than 1), the functionality is very large, so the resin has the characteristics of low-temperature rapid curing, good film-for......
2024-10-16Thermoplastic acrylic resin has advantages such as good water and chemical resistance, color and light retention, and fast drying, as it does not undergo further cross-linking during the film-forming ......
2024-10-15Classification of anti-graffiti coatings: According to its chemical composition, it is mainly divided into fluorine resin coatings and silicone coatings. People are familiar with the inner surface of......
2024-10-15UHTCs have a melting point higher than 3 000 °C and maintain stable physical and chemical properties under extreme environments. Among them, IVB and VB transition metal carbides (ZrC, TaC, HfC, TiC, e......
2024-10-14Nature It is a new kind of solution which can realize surface drying at room temperature. It can be cured at 250-500 degrees. It can be used as a ceramic precursor. The coating can be vitrified at 80......
2024-10-14What is silicone oil? Is it really responsible for hair loss, skin irritation and even cancer? Are the zero-silicone shampoos that consumers pay so much for always suitable? Listen to what the profess......
2024-10-12Fumed silica is an amorphous silica product produced by high-temperature hydrolysis of organic halogenated silanes in a hydroxide flame, with a primary particle size between 7 and 40 nanometers, and a......
2024-10-125、Application in plastics Silica is also often used in new plastics, adding a small amount of silica in the plastic mixing, will produce a significant reinforcing effect, improve the hardness and mec......
2024-10-111、Application in tires Silica is used as a reinforcing agent, and the largest amount is in the rubber sector, where it accounts for 70% of the total. Silica significantly improves the physical proper......
2024-10-11Silicone resin has excellent thermo-oxidative stability, weatherability, electrical insulation, hydrophobicity and corrosion resistance, and has been widely used in high and low temperature resistant ......
2024-10-10Organic silicone adhesives can be divided into two categories: silicone resin as the main component and silicone rubber as the main component. Because silicone resins, especially phenyl silicone resin......
2024-10-10Solvent-free pure silicone resin is pre-hydrolyzed and condensed into solid silicone resin by silane coupling agent, which does not contain alkoxy, avoiding the release of alcohols in the process of u......
2024-10-09