How to choose plating crystal brand?






There are no less than 100 brands in the market, just like the following group of penguins, which make me suffer from intensive phobia. There are imported ones, domestic ones, one-layer ones, multi-layer ones, three-month ones, and five-year ones. In short, they all say that their plating is the best.


In fact, plating crystal products from the following five points is good or bad.






1) The difference of composition of crystal plating products


The main components of traditional crystal plating are: General varnish material, silicone resin material and common silicon dioxide, etc. the stability of this kind of material is very poor, and it is easy to produce chemical reaction in case of external factors (acid rain and sediment), so the product can not achieve the long-term protection of automobile paint.








The main components of a good crystal plating product are nano titanium and highly purified silica. This kind of crystal plating product has high stability and can't react easily with unstable factors outside, so it can protect automobile paint for a long time.






2) Dosage of crystal plating products


Crystal plating products are all from the ratio of crystal plating solution to some chemical solutions and some water. The ratio of original solution directly determines the quality of crystal plating products. Many crystal plating products have very low content in order to save cost, resulting in unsatisfactory effect.






3) Thickness formed after crystal plating


The paint layer of the original car is generally about 10-30um (depending on the car model, place of origin and process), while the later maintenance products want to achieve the function of protecting the paint surface, and the thickness of the protective layer should be at least 5um. In fact, the traditional plating crystal with less than 30ml of product construction vehicle, and finally wipe off a layer, and the actual thickness of the residual on the paint surface is even less than 2um, which does not play an effective role in protecting the paint surface.






The new type of polishing free crystal plating product can form a 5-7um natural protection layer directly on the paint surface after construction, which can really bring the perfect protection of the automobile for a long time. (Note: 2um is less than half of the household fresh-keeping film, 5um is about the thickness of an ordinary A4 paper.)






4) Origin and technology of crystal plating solution


Just now, I mentioned that the crystal plating solution at the core of the crystal plating is the most important, so the source of the crystal plating solution is particularly important. At present, the technology of polysilazane and inorganic silicon should be the first choice of foreign technology, such as Japan, Germany and other countries with relatively mature technology.






5) Professional degree of crystal plating construction


Now in the market, there are car service shops that do beauty, it seems that everyone can do plating crystal. In fact, plating crystal is not as simple as everyone's surface looks. The effect of crystal plating construction is different from each construction step, time control of each process, paint surface treatment before crystal plating, even humidity and temperature control of construction environment. Therefore, the last point of small one is to pay attention to the construction professionalism.