Hits: 1368 img
IOTA 9150K is a liquid organopolysilazane specially designed for room-temperature-cure coating systems. Because it contains Si-NH-Si bonds, it can cure at room temperature; curing mainly involves hydrolysis and oxidation of Si-NH-Si. Si-NH-Si bonds also readily react with -OH on substrate surfaces, which provides good adhesion to substrates. Adding a suitable catalyst to the resin can promote the reaction between Si-H and Si-NH-Si, forming a three-dimensional crosslinked structure after curing and giving the material good mechanical properties. Based on its low viscosity and good adhesion, IOTA 9150K can be applied by wiping, dip coating, spray coating, brush coating, and other methods to metals, alloys, glass, paint films, and plastics such as PP, PC, PVC, and PMMA.
Technical data: colorless transparent to light yellow liquid, molecular weight 800–900, purity above 50% (other contents customizable), density 0.98–0.99 g/cm³, viscosity 10–40 cp, resin cracking threshold related to coatings of 100 µm and above, room-temperature self-curing, room-temperature tack-free time 1–10 min (formulated according to customer requirements), complete cure at room temperature recommended to stand for more than 24 h, accelerated complete cure by baking at 120–150°C for 2–5 h after tack-free, cured hardness 5H at 12 h and 7H at 24 h at room temperature, coating water contact angle 100°–105°, recommended service temperature <300°C for clear coatings, <1000°C for formulated coatings, good chemical barrier properties, linear shrinkage <1%, visible-light transmittance >95%, metal adhesion by cross-cut grade 0, and shelf life one year unopened.
Because the product is highly reactive, most actual sales are 50% content products, and customers add solvent as needed. Selection should not rely only on “fast tack-free,” “7H,” or “anti-corrosion.” First confirm the substrate type, pretreatment, coating role (clear coating or formulated coating), dilution ratio and solids content, application method, target film thickness, room-temperature curing and post-cure arrangement, and the project acceptance criteria for hydrophobicity, easy-clean performance, adhesion, oxidation resistance, anti-corrosion, and heat resistance. This article does not equate these properties with a specific salt-spray duration, weathering life, or fire rating. IOTA can provide polysilazane raw materials and corresponding product data; the company does not provide complete formulations or formulation development services.
IOTA 9150K is used in coatings, adhesives, non-combustible composites, polymer matrix composites, glass and abrasive fields, and easy-clean applications requiring low surface tension. Different applications focus on different points: anti-corrosion on film integrity and adhesion, easy-clean on surface tension and contact angle, adhesives on reactive bonding to the substrate, composites on wetting and curing, and glass and abrasives on transparency and application compatibility. Selection should start with the target defect and application, not just “room-temperature-cure coating.”
| What to confirm | What to specify in an inquiry or sample request |
|---|---|
| Substrate and pretreatment | Metal, alloy, glass, paint film, PP, PC, PVC, PMMA, etc.; surface cleaning, sanding, primer, or other treatment |
| Coating role | Clear coating or formulated coating; whether used as primer, topcoat, or intermediate layer |
| Dilution and solids content | Data give purity above 50% (other contents customizable); target dilution ratio, solvent type, and compatibility |
| Application method | Wiping, dip coating, spray coating, brush coating; application viscosity, coating weight, target wet/dry film thickness |
| Curing arrangement | Room-temperature tack-free 1–10 min (formulation-dependent), complete cure at room temperature for more than 24 h; whether 120–150°C for 2–5 h is used for accelerated cure |
| Film thickness and cracking | Target film thickness; the data relate the resin cracking threshold to coatings of 100 µm and above; the actual thickness limit must be confirmed with the system |
| Acceptance criteria | Contact angle, easy-clean performance, adhesion, hardness, oxidation resistance, anti-corrosion, heat resistance, transparency, etc. |
| Sample preparation | Sample size, substrate batch, number of coating passes, additional layers, whether evaluated after aging or washing, sample quantity |
If the customer already has a test specification, obtain the original document first. When criteria are missing, confirm them with the project owner and test laboratory before making samples, so that both sides do not discover different interpretations of “pass” after testing.
IOTA 9150K can self-cure at room temperature. Room-temperature tack-free time is 1–10 min (formulated according to customer requirements), and complete cure at room temperature is recommended to stand for more than 24 h. Heating can accelerate curing; after the coating is tack-free, baking at 120–150°C for 2–5 h can achieve complete cure. Cured hardness is 5H at 12 h and 7H at 24 h at room temperature, indicating that hardness develops with curing time. A tack-free or short-time hardness should not be used to judge final performance.
Adding a suitable catalyst can promote the reaction between Si-H and Si-NH-Si, forming a three-dimensional crosslinked structure. Whether to use a catalyst, the catalyst type, and the dosage should be confirmed with the formulation, substrate heat tolerance, and application window. The “room-temperature self-curing” and “catalyst-added” routes should not be mixed in evaluation.
The product data state good adhesion to metals, ceramics, and other materials, with metal adhesion by cross-cut grade 0, and applicability to metals, alloys, glass, paint films, and plastics such as PP, PC, PVC, and PMMA. Si-NH-Si bonds readily react with -OH on substrate surfaces, which helps bonding to hydroxyl-containing surfaces. However, different substrates have different surface energies, polarity, and heat tolerance; grade 0 adhesion on metal cannot be directly used to infer all plastics and paint films. Plastic substrates especially require separate confirmation of adhesion, curing-temperature compatibility, and deformation risk.
Application methods include wiping, dip coating, spray coating, and brush coating. Different methods have different requirements for viscosity, film thickness, and spreading, and should be confirmed with representative samples.
The coating water contact angle is 100°–105°. Contact angle reflects surface wetting characteristics; it is not the same as passing anti-corrosion testing, nor does it equal weathering resistance or scratch resistance. Anti-corrosion also depends on film integrity, adhesion, media, and post-test corrosion.
The product data separately state: recommended service temperature <300°C for clear coatings; <1000°C for formulated coatings. These two temperature boundaries cannot be mixed. When used alone as a clear coating, understand it as <300°C. Only when formulated into a coating should the <1000°C recommended range be discussed, and even then it must be confirmed with fillers, substrate, and actual service conditions.
The data relate the resin cracking threshold to coatings of 100 µm and above, indicating that cracking risk requires particular attention as film thickness increases. Simply increasing thickness is not a universal solution. “Non-flammable after curing” is a material characteristic description, not the same as having passed a specific fire standard or fire rating. Fire rating, smoke toxicity, and durability requirements for non-combustible composite projects must be verified separately according to the project specification.
Because the product is highly reactive, most actual sales are 50% content products, and customers add solvent as needed. Sample-request and acceptance documents should specify: incoming solids content or purity, target dilution ratio, solvent type, mixing order, application viscosity, and pot life. Storage stability and application window after dilution should be confirmed with representative samples; 50% content should not be treated as a fixed use concentration for all applications.
Obtain the customer’s service conditions and acceptance criteria; confirm whether hydrophobicity, easy-clean performance, adhesion, oxidation resistance, anti-corrosion, and heat resistance are targets or existing results.
Specify substrate, surface treatment, coating role (clear coating or formulated coating), incoming solids content and dilution ratio, application method, target film thickness, room-temperature curing, and post-cure arrangement.
Check the current IOTA 9150K data, then have the user make representative samples and keep records of formulation, dilution, application, curing, and post-cure.
Arrange tests as agreed; keep sample identity, test conditions, observation photos, and evaluation results in the report. Before expanding use, confirm whether the samples represent actual workpieces.
IOTA/Anhui Iota Silicone Oil Co., Ltd. positions itself as a solution provider across the organosilicon industry chain and can provide polysilazane raw materials and corresponding product data. When communicating, provide the substrate, existing coating system, application equipment, target defects, and curing conditions together to facilitate candidate screening; the company does not provide complete formulations or formulation development services.
That cannot be directly promised. First define the substrate, coating system, film thickness, curing route, and salt-spray criteria, and then obtain the corresponding test evidence. Anti-corrosion features are not the same as having passed a specific salt-spray duration.
No. Tack-free time can be 1–10 min depending on the formulation, and complete cure at room temperature is recommended to stand for more than 24 h; hardness is 5H at 12 h and 7H at 24 h, indicating that properties develop with curing time. After tack-free, baking at 120–150°C for 2–5 h can also accelerate complete cure.
No. Contact angle reflects surface wetting characteristics. Anti-corrosion also depends on film integrity, adhesion, media, and post-test corrosion.
No direct inference can be made. Plastic substrates have different surface energies and heat tolerance; adhesion, curing-temperature compatibility, and deformation risk should be confirmed separately.
The data state that most sales are 50% content products, and customers add solvent as needed. Specify the target dilution ratio, solvent type, mixing order, application viscosity, and pot life, and confirm the diluted performance with representative samples.
No. Non-flammability is a material characteristic description. Specific fire rating, smoke toxicity, and durability requirements must be verified separately according to the project specification.
That cannot be simply assumed. The data relate the resin cracking threshold to coatings of 100 µm and above. As film thickness increases, cracking risk requires particular attention and should be evaluated together with curing and the coating system.