Organopolysilazane IOTA 9108 (Ceramizable Precursor Polymer) for High-Temperature Anti-Corrosion and SiCN Ceramic Conversion: How to Select and Pyrolyze?

Hits: 1372 img

Direct Answer

Organopolysilazane IOTA 9108 is a liquid precursor polymer composed of repeating Si-N units, also known as a ceramizable precursor polymer. It can be used both as a thermosetting resin and as a ceramic precursor, and under relatively mild conditions it pyrolyzes to form heat-resistant SiCN ceramic products. Product features include low viscosity, short curing time, multiple curing methods, high ceramic yield, good adhesion to metals, ceramics, graphite, and other materials, easy preparation of SiCN ceramics, and heat resistance up to 1500°C.

Updated technical data: colorless to light yellow liquid, solids content above 99%, molecular weight 700–900, viscosity 10–30 cp, VOC N/A, ceramic yield at 800°C >55%, cured-product ceramic yield at 800°C >75%, and ceramic density 1.60–2.00 g/cm³. Packaging can be sealed 0.5–20 L plastic drums according to customer requirements.

Selection should not rely only on “1500°C heat resistance” or “high ceramic yield.” First confirm whether the role is a thermosetting resin or a ceramic precursor, whether the substrate is metal, ceramic, or graphite, whether the target is a coating, adhesive, or impregnant, the curing method and pyrolysis schedule, the target film thickness, and the project acceptance criteria for adhesion, oxidation resistance, anti-corrosion, and heat resistance. This article does not equate 1500°C heat resistance with long-term continuous service temperature, a specific salt-spray duration, or outdoor service life. IOTA can provide polysilazane raw materials and corresponding product data; the company does not provide complete formulations or formulation development services.

1. First Ask What IOTA 9108 Is Expected to Solve

IOTA 9108 is used in ceramic matrix composites (CMCs), metal matrix composites, high-temperature adhesives, anti-corrosion coatings, high-temperature oxidation-resistant ceramic coatings, ceramic preform impregnants, thermosetting resins, and organic-inorganic hybrid materials. Different applications focus on different points: composites on impregnation and pyrolysis, adhesives on bonding and high-temperature retention, anti-corrosion coatings on film integrity and corrosion resistance, oxidation-resistant ceramic coatings on the ceramic phase after pyrolysis, and thermosetting resins on the cured network. Selection should start with the target role and application, not just “high temperature resistant.”

2. What to Specify in an Inquiry or Sample Request

What to confirm What to specify in an inquiry or sample request
Role Whether used as a thermosetting resin or a ceramic precursor; whether pyrolysis to SiCN ceramic is required
Substrate and pretreatment Metal, ceramic, graphite, or other substrate; surface condition, cleaning, and treatment
Application form Coating, adhesive, impregnant, composite matrix, or hybrid material; target film thickness or impregnation amount
Curing and pyrolysis Curing method, temperature, and time; pyrolysis atmosphere, heating rate, target temperature, and holding time
Acceptance criteria Bond strength, ceramic yield, oxidation resistance, anti-corrosion, heat resistance, thermal shock, etc.
Packaging and storage 0.5–20 L sealed plastic drum requirements; post-opening storage and moisture protection
Sample preparation Sample size, number of coating or impregnation passes, multiple layers, additional materials, sample quantity

If the customer already has a test specification, obtain the original document first. When criteria are missing, confirm them with the project owner and test laboratory before making samples, so that both sides do not discover different interpretations of “pass” after testing.

3. First Define the Role: Thermosetting Resin or Ceramic Precursor

IOTA 9108 can be used as a thermosetting resin or as a ceramic precursor. The evaluation focus differs between the two routes: as a thermosetting resin, focus on curing method, curing time, film formation, and adhesion; as a ceramic precursor, focus on the pyrolysis schedule, ceramic yield, and integrity of the SiCN ceramic product. The product data state multiple curing methods and short curing time, but specific curing conditions should be confirmed with the formulation, film thickness, and equipment. “Fast curing” should not be taken directly as final performance.

If the target is a high-temperature oxidation-resistant ceramic coating or a ceramic matrix composite, specify whether pyrolysis is required and the target temperature after pyrolysis. Mild conditions can produce heat-resistant SiCN ceramic, but “can be pyrolyzed” does not mean any heating schedule will produce a dense, defect-free ceramic layer.

4. Distinguish the Two Ceramic Yield Metrics

The technical data separately give: ceramic yield at 800°C >55%; cured-product ceramic yield at 800°C >75%. These two metrics have different meanings: the former generally refers to the ceramic residue of the precursor under pyrolysis conditions, while the latter refers to the ceramic residue of the cured product after pyrolysis. Sample-request and acceptance documents should specify which metric is used and the corresponding test conditions; the two should not be mixed or converted into each other.

Ceramic yield and ceramic density should also be evaluated under the confirmed pyrolysis atmosphere, heating rate, target temperature, and holding time; different processes may give different results.

5. Evaluate Adhesion and Substrate Matching Separately

The product features state good adhesion to metals, ceramics, graphite, and other materials. Adhesion depends on substrate type, surface condition, pretreatment, film thickness, and curing/pyrolysis schedule. Metals, ceramics, and graphite differ in thermal expansion and surface properties; adhesion results on one substrate cannot simply be used to infer another. For high-temperature adhesive use, also confirm bond retention at high temperature and integrity after thermal shock.

When comparing candidate solutions, keep substrate, pretreatment, and curing/pyrolysis schedule as consistent as possible. If film thickness, number of impregnation passes, or additional layers are changed, record them separately.

6. Understand 1500°C Heat Resistance Under Specific Conditions

The product data state heat resistance up to 1500°C, high ceramic yield, and easy preparation of SiCN ceramics. The heat-resistance number should be understood together with atmosphere, time, heating schedule, substrate, and whether ceramic conversion has occurred. It should not be converted into long-term continuous service temperature or outdoor service life.

For anti-corrosion coating use, heat resistance is not the same as having passed a specific salt-spray or cyclic corrosion duration. For oxidation-resistant ceramic coating use, performance under high-temperature oxidation should be evaluated separately.

7. State Packaging and Solids Content Clearly

The data give solids content above 99%, with packaging in sealed 0.5–20 L plastic drums according to customer requirements. Sample-request and procurement documents should specify packaging size, post-opening storage conditions, moisture protection measures, and batch information. Solids content above 99% does not mean the product can be used as-is; whether dilution is needed and which solvent to use should be confirmed with the supplier.

8. Prepare Samples in This Order Before Sending

  1. Obtain the customer’s service conditions and acceptance criteria; confirm whether the role is a thermosetting resin or a ceramic precursor, and whether heat resistance, adhesion, oxidation resistance, and anti-corrosion requirements are targets or existing results.

  2. Specify substrate, surface treatment, application form, target film thickness or impregnation amount, curing method, pyrolysis schedule, and packaging size.

  3. Check the current IOTA 9108 data, then have the user make representative samples and keep records of formulation, dilution, curing, pyrolysis atmosphere, and heating profile.

  4. Arrange tests as agreed; keep sample identity, test conditions, observation photos, and evaluation results in the report. Before expanding use, confirm whether the samples represent actual workpieces.

IOTA/Anhui Iota Silicone Oil Co., Ltd. positions itself as a solution provider across the organosilicon industry chain and can provide polysilazane raw materials and corresponding product data. When communicating, provide the substrate, target role, existing process, pyrolysis equipment, and target defects together to facilitate candidate screening; the company does not provide complete formulations or formulation development services.

FAQ

1. Can you directly recommend an IOTA 9108 formulation for 1500°C?

First define the role, substrate, curing and pyrolysis schedule, atmosphere, and acceptance criteria, and then obtain the corresponding test evidence. Heat resistance up to 1500°C should be understood under specific conditions.

2. What is the difference between ceramic yield >55% and cured-product ceramic yield >75%?

The data give two separate metrics with different meanings: the former corresponds to the precursor’s ceramic yield, the latter to the cured product’s ceramic yield. Sample-request and acceptance documents should specify which one is used and the corresponding test conditions; they should not be mixed.

3. Is the selection focus the same for thermosetting resin and ceramic precursor use?

No. Thermosetting resin use focuses on curing method, film formation, and adhesion; ceramic precursor use focuses on pyrolysis schedule, ceramic yield, and SiCN ceramic integrity.

4. Does good adhesion to metal mean good adhesion to all substrates?

Not necessarily. Adhesion depends on substrate type, surface condition, pretreatment, and curing/pyrolysis schedule, and should be evaluated separately on the actual substrate.

5. Solids content is above 99%—can it be used directly?

That should not be assumed. High solids content does not mean the application viscosity is suitable; whether dilution is needed and which solvent to use should be confirmed with the supplier and verified with representative samples.

6. Can 1500°C heat resistance be directly converted into salt-spray duration or outdoor years?

No. Heat resistance, salt spray, and outdoor life are different evaluation dimensions and must be tested separately against project criteria; they cannot be converted into one another.

7. What should be noted after opening 0.5–20 L plastic drum packaging?

Keep it sealed, protected from moisture, and managed according to the supplier’s storage requirements. Record batch information, storage conditions, and shelf life after opening to avoid moisture absorption or contamination affecting subsequent curing and pyrolysis.

Online QQ Service, Click here

QQ Service

What's App