Proper use of thermal silicone rubber
 1. Clean the surface, clean the surface of the adhesive or coating, remove rust, dust and oil, etc. 
2. Sizing: Unscrew the rubber cap and puncture the seal with the tip of the cap. Squeeze the glue onto the cleaned surface, make it evenly distributed, and close the fixed surface. 
3 Fixed words: Putting the painted parts in the air will cause the skin to form slowly, any operation should be The surface is finished before the crust. The curing process is inwardly evolved from the surface. Within 24 hours, the glue will be fixed at a depth of 2~4mm. If the position is deep, especially in areas where air is not easily accessible, the time for complete curing will be prolonged. If the temperature is lower, the curing time is also relatively extended. 
4. If the operation is not good, do not move, use or pack until the sufficient strength is reached.