Analysis on the position and reason of easy cracking of quartzite platform
Hits: 3893400
2020-04-14
Shandong Kangjieli quartz stone Co., Ltd
Website: www.kjlsys.com
Tel: 0537-5123456 5126666 5123333
The most important thing in kitchen decoration is the selection of the counter top. The quality of the counter top will directly affect the service life of the whole kitchen facilities. There should also be certain requirements for the environmental protection of the counter top materials, because the counter top is in direct contact with our food. If the counter top contains toxic substances, it will cause certain threats to our health.
At present, the common countertop materials in the market are artificial stone, natural stone, quartz stone, ultra-thin rock plate and stainless steel, etc. The highest usage rate is quartz stone table. Quartz stone is a kind of die-casting artificial stone product. It is molded by quartz stone manufacturers. It has many advantages, such as wear-resistant, scratch resistant, high temperature resistant, impermeable, non-toxic and radiation-free. However, because the hardness of quartz stone can reach the highest level of Mohs hardness 7, it is not easy to process, and it is easy to crack or explode in use.
1. Cracks at the splicing joints of the table top: when the erector is splicing, the seams are not aligned, the glue is not evenly applied, or the glue is added with solidifying agent or excessive promoting agent to make the splicing joint brittle, which is cracked when it is slightly impacted in the use process;
2. Cracking at the corner: cracking due to too tight wall without shrinkage joint, uneven or flat between two cabinets, impact of external force or uneven shrinkage of the temperature change table;
3. Cracks around the basin on the stage: there is no gap between the basin on the stage and the basin hole, the basin hole is not polished, the two are smooth, impacted by external forces or uneven contraction of the temperature change table;