IOTA 3830 Series Phenyl Compound Adhesive is a material used in a number of applications in the electrical and electronics,
aviation, aerospace and military industries. The product can be used in molding, injection molding and extrusion tube molding, and after processing, can be made into seals, gaskets, tubes and rods.
After processing, it can be made into seals, gaskets, tubes and rods, which are suitable for low temperature resistance, radiation resistance, high damping and abrasion resistance.
They are suitable for low-temperature, radiation, high damping and ablation-resistant scenarios.
The IOTA 3830 series performs well in specific environments down to -100°C and can be maintained in cold regions or under specific conditions.
cold regions or under certain conditions to maintain its physical and mechanical properties. In addition, the compound has good damping properties, making it suitable for vibration-reducing applications.
In addition, the compound has good damping properties, making it suitable for applications where vibration reduction is important. Its radiation resistance also makes it suitable for use in radiation environments.
The IOTA 3830 series is available in a wide range of hardnesses, allowing the user to select the material according to specific needs.
For example, IOTA 3830 has a Shore hardness of 30, a tensile strength of 8.5 MPa, good ductility, elongation up to 900%, and a good resistance to vibration.
The elongation is up to 900%, which is suitable for applications with high flexibility requirements. IOTA3860 has a high hardness of 59 Shore.
IOTA3860 has a high Shore hardness of 59, with good tensile strength and tear resistance, suitable for high loads.
The series performs well in tensile and compressive deformation. The performance of different models at
The compression set after 24 hours at 200°C ranges from 30% to 45%, which maintains its performance at high temperatures and pressures.
IOTA 3830 series phenyl compounds provide sealing and protection for equipment in a wide range of industries.
IOTA 3830 series phenyl compounds provide sealing and protection for equipment that meets the needs of a wide range of industries.
IOTA 3830 series has been tested with a 50% bis-di-penta crosslinker at 1% and tested at 175°C with a 1% addition.
A 5-minute heat treatment at 175°C helps stabilize the material's properties. Its transparent appearance also offers
product's application options.
If you need a material for low temperature, radiation and damping needs, IOTA 3830 series phenyl compounds are an option to consider.

Room termperature curing polysilazane, pls check IOTA 9150, IOTA 9150A. 
High termperature curing polysilazane, pls check IOTA 9108, IOTA 9118.