The methods of controlling humidity can be divided into two categories: humidification and dehumidification, as follows:
Methods to increase humidity
Using a humidifier: This is the most common method of humidification, including ultrasonic humidifiers, evaporative humidifiers, etc. Ultrasonic humidifiers convert water into tiny particles and release them into the air through high-frequency oscillation; Evaporative humidifiers use fans to pass air through a wet curtain to increase moisture content. Suitable humidifiers can be selected based on room size and needs.
Place a water basin or wet towel: Place a water basin indoors to allow moisture to evaporate naturally and increase air humidity. You can also place a wet towel on indoor objects, which can also have a certain moisturizing effect.
Planting plants: Some plants such as green ivy, ivy, and bamboo have strong transpiration, which can release water into the air, increase indoor humidity, and beautify the environment.
Reasonable water use: Spray water mist appropriately indoors, such as spraying a small amount of water on the ground or walls, but be careful to avoid excessive spraying that may cause water accumulation. When using indoor stoves or heating equipment in winter, you can boil a pot of water on the stove to evaporate the water vapor.
Methods to reduce humidity
Ventilation and air exchange: When the weather is sunny and the outdoor humidity is low, open the windows to allow air circulation and expel indoor moisture. Exhaust fans can also be installed, especially in areas with high humidity such as kitchens and bathrooms, to accelerate air circulation and reduce humidity.
Using a dehumidifier: It is a professional dehumidification device that uses the condensation principle to condense moisture in the air into water and discharge it, thereby reducing air humidity. Choose a dehumidifier with appropriate power and capacity according to the usage scenario and requirements.
Using desiccants: Place desiccants such as lime, activated carbon, silicone gel, etc. in wardrobes, shoe cabinets, storage boxes, etc. These materials have strong moisture absorption properties and can absorb moisture from the air.
Using air conditioning: Many air conditioners have dehumidification function. In humid seasons or environments, the dehumidification mode of the air conditioner can be turned on to reduce indoor humidity.
Reduce indoor water sources: timely clean up accumulated water in the home, such as water stains in the kitchen and bathroom; Repair leaking faucets, pipes, etc; Control the frequency and amount of water generated by activities such as bathing and mopping the floor to avoid water retention indoors.

Room termperature curing polysilazane, pls check IOTA 9150, IOTA 9150K.     
High termperature curing polysilazane, pls check IOTA 9108, IOTA 9118.