In today's pursuit of efficient cleaning and long - lasting protection, the Water - Based Nano High - Hardness Self - Cleaning Coating IOTA ST1 is undoubtedly an ideal choice. It comes in the form of an emulsion - like liquid, prepared using advanced nano - coating preparation technology and containing nano - scale materials with powerful functions.

When applied to the surface of a substrate, this coating can generate hydroxyl radicals under the action of ultraviolet and visible light, possessing strong catalytic degradation and self - cleaning functions. It can effectively decompose various surface oil stains, kill a variety of bacteria, and treat the toxins released by them. It also has the abilities to remove formaldehyde, deodorize, resist stains, and purify the air.

IOTA ST1 has a wide range of application areas. It is suitable for anti - oxidation, waterproofing, and anti - fouling treatments on metal surfaces, hydrophobic, anti - fouling, and anti - ultraviolet coatings on glass surfaces, waterproof, anti - fouling, and anti - corrosion treatments on ceramic and stone surfaces, as well as anti - fouling and weather - resistant coatings for solar cells.

Its performance characteristics are outstanding. After full curing, it has excellent hydrophobic properties with a water contact angle of over 100 degrees and no water marks when water droplets roll off. The cured coating is transparent and colorless with high light transmittance. Its hardness can reach 8H, and it is resistant to aging and provides long - lasting self - cleaning. The construction is simple, and the water - based coating leaves no residue. Nano - titanium dioxide can also have antibacterial and deodorizing effects under light. It is resistant to boiling water and high temperatures, with no changes in the coating at temperatures below 200 degrees.

The construction operation is also very convenient. After normal - temperature spraying or dip - coating and pulling, it dries on the surface in 10 - 30 minutes, and then is heated at 170℃ for 5 minutes or cured at normal temperature for 1 - 3 days (requiring the addition of 5% - 8% curing agent). Choosing IOTA ST1 means choosing efficient cleaning and long - lasting protection, adding convenience to your life and work!

Room termperature curing polysilazane, pls check IOTA 9150, IOTA 9150K.       
High termperature curing polysilazane, pls check IOTA 9108, IOTA 9118.