To choose silicone resin products suitable for specific applications, the following key aspects can be considered:
Performance requirements
High temperature resistance:
If the application scenario is in a high-temperature environment, such as protective coatings for industrial boilers, sealing of components near automotive engines, etc., then it is necessary to choose silicone resin with excellent high-temperature resistance. Usually, the highest temperature index it can withstand is checked, such as products that can withstand temperatures above 200 ℃ or even higher for a long time, to ensure that they will not decompose, deform, or affect the use effect under high-temperature conditions.
For some ordinary decorative coatings and other applications used in normal temperature environments, the requirements for high temperature resistance are relatively not so high. Conventional medium and low temperature resistant silicone resins may be sufficient to meet the needs.
Weather resistance:
When silicone resin is used for outdoor building exterior walls, outdoor signage, and other places that are exposed to natural environments for a long time, it is recommended to choose products with good weather resistance, that is, silicone resin that can resist UV radiation, wind and rain erosion, temperature changes, and other factors for a long time without discoloration, powdering, cracking, and other phenomena. Generally, relevant data from outdoor aging tests will be referred to for judgment.
If used in relatively stable indoor environments, such as the packaging of indoor electronic devices, the weight of weather resistance considerations can be appropriately reduced.
Electrical insulation:
In the field of electronic appliances, applications such as motor winding insulation paint and insulation protection for high-voltage electrical appliances require the selection of silicone resin with high electrical insulation performance. Key electrical parameters such as dielectric constant and breakdown voltage should be considered to ensure compliance with corresponding electrical safety standards, guarantee the normal operation of electrical equipment, and avoid electrical accidents.
If it is only used in some non electrical performance dominated occasions, such as ordinary fabric finishing, the requirements for electrical insulation can be ignored.
Mechanical properties:
For application scenarios such as mold release agents that require a certain amount of external friction and compression, silicone resin with appropriate mechanical strength and good wear resistance should be selected to ensure that it will not be easily damaged during repeated use and can continue to play a demolding role.
In applications such as soft fabric finishing agents that do not require high mechanical strength, silicone resin is more focused on endowing fabrics with other properties such as hand feel.
Adaptability of processing technology
Curing conditions:
If the production process has the conditions for heating and curing, such as in a professional paint booth in a factory, thermosetting silicone resin can be selected, which can often form coatings or products with better performance after curing; But if heating operation cannot be carried out on the construction site, it is necessary to use silicone resin products that cure at room temperature, which is convenient for construction operation and can ensure normal curing to form the required usage state.
In addition, for some production lines that have special requirements for curing speed, such as rapidly assembling electronic component packaging, silicone resin with fast curing speed should be selected to meet the efficient production rhythm; For some small-scale processing scenarios that require manual operation and relatively ample time, the requirements for curing speed are not as strict.
Solubility and operability:
In the application of coatings, if spraying technology is used, it is necessary for silicone resin to dissolve well in the corresponding organic solvents to form a uniform and stable solution, which is easy to spray evenly through a spray gun; If brushing or other methods are used, the requirements for solubility will be slightly different, as long as it can ensure smooth brushing and no obvious brush marks.
In the application of adhesives, it is necessary to consider whether the viscosity of silicone resin is easy to apply during the bonding process. If it is too thick, it may not be easy to apply evenly, and if it is too thin, it may affect the bonding effect. Therefore, it is necessary to choose products that are compatible with the specific bonding process.
Environmental and safety requirements
Environmental indicators:
Nowadays, many application scenarios have strict requirements for environmental protection. For example, in indoor decoration and processing of children's products, it is necessary to choose silicone resin products that meet relevant national environmental standards, such as low VOC (volatile organic compound) emissions, to reduce the impact on indoor air quality and potential harm to human health.
For non enclosed environments in some industrial fields with relatively relaxed environmental restrictions, the weight of environmental indicators can be adjusted appropriately, but basic environmental regulations must also be followed.
Security:
In the application of food contact materials, such as sealing materials for food packaging, it is necessary to use silicone resin that has passed food grade safety certification to ensure that harmful substances will not migrate into food and ensure food safety; When using silicone resin in places with fire prevention requirements, attention should be paid to its flame retardant performance, and products with corresponding flame retardant levels should be selected to reduce the risk of fire.
Cost factors
Budget limitations:
Under the premise of meeting basic performance and quality requirements, prices of silicone resin products of different brands and specifications may vary. If it is large-scale industrial production, cost control is crucial. It is necessary to comprehensively compare the cost-effectiveness of products from different suppliers, choose silicone resins that can meet application needs and have reasonable prices, and avoid excessive pursuit of high performance, which may lead to high costs and affect the market competitiveness of products.
For some special applications that are not very sensitive to cost but have extremely high performance requirements, such as key component protection in the aerospace field, priority is given to ensuring performance, and cost considerations are relatively low.
Taking into account the above factors, it is possible to more accurately select silicone resin products suitable for specific applications.

Room termperature curing polysilazane, pls check IOTA 9150, IOTA 9150K. 
High termperature curing polysilazane, pls check IOTA 9108, IOTA 9118.